| TD: Bona Fide Non-US Federal Government Agency or Organization

Bona Fide Non-US Federal Government Agency or Organization, v1.0

Used to demonstrate that an agency or organization is NOT part of the United States federal government, and therefore is not subject to certain rules and regulations that pertain to U.S. federal agencies.

Assessment Steps (2)

1 Verification of Contact Info (VerificationofContactInfo) Verify the purported contact information and point of contact of the trustmark applicant. Acceptable means of verification include the following. Verify the information is consistent with information available in the White Pages or Yellow Pages. Verify the information is consistent with information available in Dun & Bradstreet reports. Verify the addresses by physically inspecting the property located at those addresses. Verify the organization phone number by calling the number. Verify the point of contact by calling the organization phone number and inquiring about the point of contact. Was the purported contact information successfully verified? Document the means used to verify the information. Artifact A1 Means of verification of the organization's contact information.
2 Verification of Legitimacy (VerificationofLegitimacy) Is the organization a legitimate organization operating within the United States but not part of the Federal Government? For state, local, and tribal government agencies please provide documentation of authority. For NGOs, please provide certificate of incorporation. Artifact A1 Means of verification of the organization's legitimacy.

Conformance Criteria (2)

Contact Information The organization MUST purport the organization's contact information and the name and contact information of an individual point of contact (the "contact") who is a person that is a representative of the organization. This information MUST be verifiable via an independent, publicly accessible source. The purported contact information MUST include an address of business operations, a mailing address, and a telephone number. The purported point of contact information MUST include the contact's first name, last name, business telephone number, and the capacity in which the contact represents the organization.
Legitimate Non-Federal Government Organization If the organization claims to be a state, local, or tribal government agency, then it MUST have been created by an appropriate legislative, executive, or judicial authority. If it is a non-governmental organization (NGO) then either it or its parent organization MUST be registered with the Secretary of State of the State specified in one of the organization's addresses of record.

Term Name	Abbreviations	Definition
Access		To make contact with one or more discrete functions of an online, digital service.
Active Attack		An attack on the authentication protocol where the attacker transmits data to the claimant, Credential Service Provider (CSP), verifier, or Relying Party (RP). Examples of active attacks include man-in-the-middle (MitM), impersonation, and session hijacking.
Address of Record		The validated and verified location (physical or digital) where an individual can receive communications using approved mechanisms.
Applicant		A subject undergoing the processes of enrollment and identity proofing.
Approved Cryptography		Federal Information Processing Standard (FIPS)-approved or NIST recommended. An algorithm or technique that is either 1) specified in a FIPS or NIST Recommendation, or 2) adopted in a FIPS or NIST Recommendation.
Assertion		A statement from a verifier to an RP that contains information about a subscriber. Assertions may also contain verified attributes.
Assertion Reference		A data object, created in conjunction with an assertion, that identifies the verifier and includes a pointer to the full assertion held by the verifier.
Asymmetric Keys		Two related keys, comprised of a public key and a private key, that are used to perform complementary operations such as encryption and decryption or signature verification and generation.
Attack		An unauthorized entity's attempt to fool a verifier or RP into believing that the unauthorized individual in question is the subscriber.
Attacker		A party, including an insider, who acts with malicious intent to compromise a system.
Attribute		A quality or characteristic ascribed to someone or something.
Attribute Bundle		A packaged set of attributes, usually contained within an assertion. Attribute bundles offer RPs a simple way to retrieve the most relevant attributes they need from IdPs. Attribute bundles are synonymous with OpenID Connect scopes.
Attribute Reference		A statement asserting a property of a subscriber without necessarily containing identity information, independent of format. For example, for the attribute "birthday," a reference could be "older than 18" or "born in December."
Attribute Value		A complete statement asserting a property of a subscriber, independent of format. For example, for the attribute "birthday," a value could be "12/1/1980" or "December 1, 1980."
Authenticate		See authentication.
Authenticated Protected Channel		An encrypted communication channel that uses approved cryptography where the connection initiator (client) has authenticated the recipient (server). Authenticated protected channels provide confidentiality and MitM protection and are frequently used in the user authentication process. Transport Layer Security (TLS) is an example of an authenticated protected channel where the certificate presented by the recipient is verified by the initiator. Unless otherwise specified, authenticated protected channels do not require the server to authenticate the client. Authentication of the server is often accomplished through a certificate chain leading to a trusted root rather than individually with each server.
Authentication		Verifying the identity of a user, process, or device, often as a prerequisite to allowing access to a system's resources.
Authentication Factor		The three types of authentication factors are something you know, something you have, and something you are. Every authenticator has one or more authentication factors.
Authentication Intent		The process of confirming the claimant's intent to authenticate or reauthenticate by including a process requiring user intervention in the authentication flow. Some authenticators (e.g., OTP devices) establish authentication intent as part of their operation, others require a specific step, such as pressing a button, to establish intent. Authentication intent is a countermeasure against use by malware of the endpoint as a proxy for authenticating an attacker without the subscriber's knowledge.
Authentication Protocol		A defined sequence of messages between a claimant and a verifier that demonstrates that the claimant has possession and control of one or more valid authenticators to establish their identity, and, optionally, demonstrates that the claimant is communicating with the intended verifier.
Authentication Protocol Run		An exchange of messages between a claimant and a verifier that results in authentication (or authentication failure) between the two parties.
Authentication Secret		A generic term for any secret value that an attacker could use to impersonate the subscriber in an authentication protocol. These are further divided into short-term authentication secrets, which are only useful to an attacker for a limited period of time, and long-term authentication secrets, which allow an attacker to impersonate the subscriber until they are manually reset. The authenticator secret is the canonical example of a long-term authentication secret, while the authenticator output, if it is different from the authenticator secret, is usually a short-term authentication secret.
Authenticator		Something the claimant possesses and controls (typically a cryptographic module or password) that is used to authenticate the claimant's identity. In previous editions of SP 800-63, this was referred to as a token.
Authenticator Assurance Level	AAL	A category describing the strength of the authentication process.
Authenticator Output		The output value generated by an authenticator. The ability to generate valid authenticator outputs on demand proves that the claimant possesses and controls the authenticator. Protocol messages sent to the verifier are dependent upon the authenticator output, but they may or may not explicitly contain it.
Authenticator Secret		The secret value contained within an authenticator.
Authenticator Type		A category of authenticators with common characteristics. Some authenticator types provide one authentication factor, others provide two.
Authenticity		The property that data originated from its purported source.
Authoritative Source		An entity that has access to, or verified copies of, accurate information from an issuing source such that a CSP can confirm the validity of the identity evidence supplied by an applicant during identity proofing. An issuing source may also be an authoritative source. Often, authoritative sources are determined by a policy decision of the agency or CSP before they can be used in the identity proofing validation phase.
Authorize		A decision to grant access, typically automated by evaluating a subject's attributes.
Back-Channel Communication		Communication between two systems that relies on a direct connection (allowing for standard protocol-level proxies), without using redirects through an intermediary such as a browser. This can be accomplished using HTTP requests and responses.
Bearer Assertion		The assertion a party presents as proof of identity, where possession of the assertion itself is sufficient proof of identity for the assertion bearer.
Binding		An association between a subscriber identity and an authenticator or given subscriber session.
Biometrics		Automated recognition of individuals based on their biological and behavioral characteristics.
Challenge-Response Protocol		An authentication protocol where the verifier sends the claimant a challenge (usually a random value or nonce) that the claimant combines with a secret (such as by hashing the challenge and a shared secret together, or by applying a private key operation to the challenge) to generate a response that is sent to the verifier. The verifier can independently verify the response generated by the claimant (such as by re-computing the hash of the challenge and the shared secret and comparing to the response, or performing a public key operation on the response) and establish that the claimant possesses and controls the secret.
Claimant		A subject whose identity is to be verified using one or more authentication protocols.
Claimed Address		The physical location asserted by a subject where they can be reached. It includes the individual's residential street address and may also include their mailing address. For example, a person with a foreign passport living in the U.S. will need to give an address when going through the identity proofing process. This address would not be an "address of record" but a "claimed address."
Claimed Identity		An applicant's declaration of unvalidated and unverified personal attributes.
Completely Automated Public Turing test to tell Computers and Humans Apart	CAPTCHA	An interactive feature added to web forms to distinguish whether a human or automated agent is using the form. Typically, it requires entering text corresponding to a distorted image or a sound stream.
Credential		An object or data structure that authoritatively binds an identity - via an identifier or identifiers - and (optionally) additional attributes, to at least one authenticator possessed and controlled by a subscriber. While common usage often assumes that the subscriber maintains the credential, these guidelines also use the term to refer to electronic records maintained by the CSP that establish binding between the subscriber's authenticator(s) and identity.
Credential Service Provider	CSP	A trusted entity that issues or registers subscriber authenticators and issues electronic credentials to subscribers. A CSP may be an independent third party or issue credentials for its own use.
Cross-site Request Forgery	CSRF	An attack in which a subscriber currently authenticated to an RP and connected through a secure session browses to an attacker's website, causing the subscriber to unknowingly invoke unwanted actions at the RP. For example, if a bank website is vulnerable to a CSRF attack, it may be possible for a subscriber to unintentionally authorize a large money transfer, merely by viewing a malicious link in a webmail message while a connection to the bank is open in another browser window.
Cross-site Scripting	XSS	A vulnerability that allows attackers to inject malicious code into an otherwise benign website. These scripts acquire the permissions of scripts generated by the target website and can therefore compromise the confidentiality and integrity of data transfers between the website and client. Websites are vulnerable if they display user-supplied data from requests or forms without sanitizing the data so that it is not executable.
Cryptographic Authenticator		An authenticator where the secret is a cryptographic key.
Cryptographic Key		A value used to control cryptographic operations, such as decryption, encryption, signature generation, or signature verification. For the purposes of these guidelines, key requirements shall meet the minimum requirements stated in Table 2 of NIST SP 800-57 Part 1. See also asymmetric keys, symmetric key.
Cryptographic Module		A set of hardware, software, and/or firmware that implements approved security functions (including cryptographic algorithms and key generation).
Data Integrity		The property that data has not been altered by an unauthorized entity.
Derived Credential		A credential issued based on proof of possession and control of an authenticator associated with a previously issued credential, so as not to duplicate the identity proofing process.
Digital Authentication		The process of establishing confidence in user identities presented digitally to a system. In previous editions of SP 800-63, this was referred to as Electronic Authentication.
Digital Signature		An asymmetric key operation where the private key is used to digitally sign data and the public key is used to verify the signature. Digital signatures provide authenticity protection, integrity protection, and non-repudiation, but not confidentiality protection.
Diversionary		In regards to KBV, a multiple-choice question for which all answers provided are incorrect, requiring the applicant to select an option similar to "none of the above."
Eavesdropping Attack		An attack in which an attacker listens passively to the authentication protocol to capture information that can be used in a subsequent active attack to masquerade as the claimant.
Electronic Authentication	E-Authentication	See digital authentication.
Enrollment		The process through which an applicant applies to become a subscriber of a CSP and the CSP validates the applicant's identity.
Entropy		A measure of the amount of uncertainty an attacker faces to determine the value of a secret. Entropy is usually stated in bits. A value having n bits of entropy has the same degree of uncertainty as a uniformly distributed n-bit random value.
Federal Information Processing Standard	FIPS	Under the Information Technology Management Reform Act (Public Law 104-106), the Secretary of Commerce approves the standards and guidelines that the National Institute of Standards and Technology (NIST) develops for federal computer systems. NIST issues these standards and guidelines as Federal Information Processing Standards (FIPS) for government-wide use. NIST develops FIPS when there are compelling federal government requirements, such as for security and interoperability, and there are no acceptable industry standards or solutions.
Federation		A process that allows the conveyance of identity and authentication information across a set of networked systems.
Federation Assurance Level	FAL	A category describing the assertion protocol used by the federation to communicate authentication and attribute information (if applicable) to an RP.
Federation Proxy		A component that acts as a logical RP to a set of IdPs and a logical IdP to a set of RPs, bridging the two systems with a single component. These are sometimes referred to as "brokers".
Front-Channel Communication		Communication between two systems that relies on redirects through an intermediary such as a browser. This is normally accomplished by appending HTTP query parameters to URLs hosted by the receiver of the message.
Hash Function		A function that maps a bit string of arbitrary length to a fixed-length bit string. Approved hash functions satisfy the following properties: (1) One-way - It is computationally infeasible to find any input that maps to any pre-specified output; and (2) Collision resistant - It is computationally infeasible to find any two distinct inputs that map to the same output.
Identity		An attribute or set of attributes that uniquely describe a subject within a given context.
Identity Assurance Level	IAL	A category that conveys the degree of confidence that the applicant's claimed identity is their real identity.
Identity Evidence		Information or documentation provided by the applicant to support the claimed identity. Identity evidence may be physical (e.g. a driver license) or digital (e.g. an assertion generated and issued by a CSP based on the applicant successfully authenticating to the CSP).
Identity Proofing		The process by which a CSP collects, validates, and verifies information about a person.
Identity Provider	IdP	The party that manages the subscriber's primary authentication credentials and issues assertions derived from those credentials. This is commonly the CSP as discussed within this document suite.
Issuing Source		An authority responsible for the generation of data, digital evidence (such as assertions), or physical documents that can be used as identity evidence.
Kerberos		A widely used authentication protocol developed at MIT. In "classic" Kerberos, users share a secret password with a Key Distribution Center (KDC). The user (Alice) who wishes to communicate with another user (Bob) authenticates to the KDC and the KDC furnishes a "ticket" to use to authenticate with Bob.
Knowledge-Based Verification	KBV	Identity verification method based on knowledge of private information associated with the claimed identity. This is often referred to as knowledge-based authentication (KBA) or knowledge-based proofing (KBP).
Man-in-the-Middle Attack	MitM, MitMA	An attack in which an attacker is positioned between two communicating parties in order to intercept and/or alter data traveling between them. In the context of authentication, the attacker would be positioned between claimant and verifier, between registrant and CSP during enrollment, or between subscriber and CSP during authenticator binding.
Memorized Secret		A type of authenticator comprised of a character string intended to be memorized or memorable by the subscriber, permitting the subscriber to demonstrate something they know as part of an authentication process.
Message Authentication Code	MAC	A cryptographic checksum on data that uses a symmetric key to detect both accidental and intentional modifications of the data. MACs provide authenticity and integrity protection, but not non-repudiation protection.
Mobile Code		Executable code that is normally transferred from its source to another computer system for execution. This transfer is often through the network (e.g., JavaScript embedded in a web page) but may transfer through physical media as well.
Multi-Factor		A characteristic of an authentication system or an authenticator that requires more than one distinct authentication factor for successful authentication. MFA can be performed using a single authenticator that provides more than one factor or by a combination of authenticators that provide different factors. The three authentication factors are something you know, something you have, and something you are.
Multi-Factor Authentication	MFA	An authentication system that requires more than one distinct authentication factor for successful authentication. Multi-factor authentication can be performed using a multi-factor authenticator or by a combination of authenticators that provide different factors. The three authentication factors are something you know, something you have, and something you are.
Multi-Factor Authenticator		An authenticator that provides more than one distinct authentication factor, such as a cryptographic authentication device with an integrated biometric sensor that is required to activate the device.
Network		An open communications medium, typically the Internet, used to transport messages between the claimant and other parties. Unless otherwise stated, no assumptions are made about the network's security; it is assumed to be open and subject to active (e.g., impersonation, man-in-the-middle, session hijacking) and passive (e.g., eavesdropping) attack at any point between the parties (e.g., claimant, verifier, CSP, RP).
Nonce		A value used in security protocols that is never repeated with the same key. For example, nonces used as challenges in challenge-response authentication protocols SHALL not be repeated until authentication keys are changed. Otherwise, there is a possibility of a replay attack. Using a nonce as a challenge is a different requirement than a random challenge, because a nonce is not necessarily unpredictable.
Offline Attack		An attack where the attacker obtains some data (typically by eavesdropping on an authentication protocol run or by penetrating a system and stealing security files) that he/she is able to analyze in a system of his/her own choosing.
Online Attack		An attack against an authentication protocol where the attacker either assumes the role of a claimant with a genuine verifier or actively alters the authentication channel.
Online Guessing Attack		An attack in which an attacker performs repeated logon trials by guessing possible values of the authenticator output.
Pairwise Pseudonymous Identifier		An opaque unguessable subscriber identifier generated by a CSP for use at a specific individual RP. This identifier is only known to and only used by one CSP-RP pair.
Passive Attack		An attack against an authentication protocol where the attacker intercepts data traveling along the network between the claimant and verifier, but does not alter the data (i.e., eavesdropping).
Passphrase		A passphrase is a memorized secret consisting of a sequence of words or other text that a claimant uses to authenticate their identity. A passphrase is similar to a password in usage, but is generally longer for added security.
Password		See memorized secret.
Personal Data		See personally identifiable information.
Personal Identification Number	PIN	A memorized secret typically consisting of only decimal digits.
Personal Information		See personally identifiable information.
Personally Identifiable Information	PII	As defined by OMB Circular A-130, Personally Identifiable Information is information that can be used to distinguish or trace an individual's identity, either alone or when combined with other information that is linked or linkable to a specific individual.
Pharming		An attack in which an attacker corrupts an infrastructure service such as DNS (Domain Name System) causing the subscriber to be misdirected to a forged verifier/RP, which could cause the subscriber to reveal sensitive information, download harmful software, or contribute to a fraudulent act.
Phishing		An attack in which the subscriber is lured (usually through an email) to interact with a counterfeit verifier/RP and tricked into revealing information that can be used to masquerade as that subscriber to the real verifier/RP.
Possession and Control of an Authenticator		The ability to activate and use the authenticator in an authentication protocol.
Practice Statement		A formal statement of the practices followed by the parties to an authentication process (e.g., CSP or verifier). It usually describes the parties' policies and practices and can become legally binding.
Presentation Attack		Presentation to the biometric data capture subsystem with the goal of interfering with the operation of the biometric system.
Presentation Attack Detection	PAD	Automated determination of a presentation attack. A subset of presentation attack determination methods, referred to as liveness detection, involve measurement and analysis of anatomical characteristics or involuntary or voluntary reactions, in order to determine if a biometric sample is being captured from a living subject present at the point of capture.
Private Credentials		Credentials that cannot be disclosed by the CSP because the contents can be used to compromise the authenticator.
Private Key		The secret part of an asymmetric key pair that is used to digitally sign or decrypt data.
Protected Session		A session wherein messages between two participants are encrypted and integrity is protected using a set of shared secrets called session keys. A participant is said to be authenticated if, during the session, they prove possession of one or more authenticators in addition to the session keys, and if the other party can verify the identity associated with the authenticator(s). If both participants are authenticated, the protected session is said to be mutually authenticated.
Pseudonym		A name other than a legal name.
Pseudonymity		The use of a pseudonym to identify a subject.
Pseudonymous Identifier		A meaningless but unique number that does not allow the RP to infer anything regarding the subscriber but which does permit the RP to associate multiple interactions with the subscriber's claimed identity.
Public Credentials		Credentials that describe the binding in a way that does not compromise the authenticator.
Public Key		The public part of an asymmetric key pair that is used to verify signatures or encrypt data.
Public Key Certificate		A digital document issued and digitally signed by the private key of a certificate authority that binds an identifier to a subscriber to a public key. The certificate indicates that the subscriber identified in the certificate has sole control and access to the private key.
Public Key Infrastructure	PKI	A set of policies, processes, server platforms, software, and workstations used for the purpose of administering certificates and public-private key pairs, including the ability to issue, maintain, and revoke public key certificates.
Reauthentication		The process of confirming the subscriber's continued presence and intent to be authenticated during an extended usage session.
Registration		See enrollment.
Relying Party	RP	An entity that relies upon the subscriber's authenticator(s) and credentials or a verifier's assertion of a claimant's identity, typically to process a transaction or grant access to information or a system.
Remote		(In the context of remote authentication or remote transaction) An information exchange between network-connected devices where the information cannot be reliably protected end-to-end by a single organization's security controls.
Replay Attack		An attack in which the attacker is able to replay previously captured messages (between a legitimate claimant and a verifier) to masquerade as that claimant to the verifier or vice versa.
Replay Resistance		The property of an authentication process to resist replay attacks, typically by use of an authenticator output that is valid only for a specific authentication.
Restricted		An authenticator type, class, or instantiation having additional risk of false acceptance associated with its use that is therefore subject to additional requirements.
Risk Assessment		The process of identifying, estimating, and prioritizing risks to organizational operations (including mission, functions, image, or reputation), organizational assets, individuals, and other organizations, resulting from the operation of a system. It is part of risk management, incorporates threat and vulnerability analyses, and considers mitigations provided by security controls planned or in place. Synonymous with risk analysis.
Risk Management		The program and supporting processes to manage information security risk to organizational operations (including mission, functions, image, reputation), organizational assets, individuals, other organizations, and includes: (i) establishing the context for risk-related activities; (ii) assessing risk; (iii) responding to risk once determined; and (iv) monitoring risk over time.
Salt		A non-secret value used in a cryptographic process, usually to ensure that the results of computations for one instance cannot be reused by an attacker.
Secure Sockets Layer	SSL	See Transport Layer Security (TLS).
Session		A persistent interaction between a subscriber and an endpoint, either an RP or a CSP. A session begins with an authentication event and ends with a session termination event. A session is bound by use of a session secret that the subscriber's software (a browser, application, or OS) can present to the RP or CSP in lieu of the subscriber's authentication credentials.
Session Hijack Attack		An attack in which the attacker is able to insert himself or herself between a claimant and a verifier subsequent to a successful authentication exchange between the latter two parties. The attacker is able to pose as a subscriber to the verifier or vice versa to control session data exchange. Sessions between the claimant and the RP can be similarly compromised.
Shared Secret		A secret used in authentication that is known to the subscriber and the verifier.
Side-Channel Attack		An attack enabled by leakage of information from a physical cryptosystem. Characteristics that could be exploited in a side-channel attack include timing, power consumption, and electromagnetic and acoustic emissions.
Single-Factor		A characteristic of an authentication system or an authenticator that requires only one authentication factor (something you know, something you have, or something you are) for successful authentication.
Social Engineering		The act of deceiving an individual into revealing sensitive information, obtaining unauthorized access, or committing fraud by associating with the individual to gain confidence and trust.
Special Publication	SP	A type of publication issued by NIST. Specifically, the SP 800-series reports on the Information Technology Laboratory's research, guidelines, and outreach efforts in computer security, and its collaborative activities with industry, government, and academic organizations.
Subject		A person, organization, device, hardware, network, software, or service.
Subscriber		A party who has received a credential or authenticator from a CSP.
Symmetric Key		A cryptographic key used to perform both the cryptographic operation and its inverse. For example, to encrypt and decrypt or create a message authentication code and to verify the code.
Token		See authenticator.
Token Authenticator		See authenticator output.
Token Secret		See authenticator secret.
Transaction		A discrete event between a user and a system that supports a business or programmatic purpose. A government digital system may have multiple categories or types of transactions, which may require separate analysis within the overall digital identity risk assessment.
Transport Layer Security	TLS	An authentication and security protocol widely implemented in browsers and web servers. TLS is defined by RFC 5246. TLS is similar to the older SSL protocol, and TLS 1.0 is effectively SSL version 3.1. NIST SP 800-52, Guidelines for the Selection and Use of Transport Layer Security (TLS) Implementations, specifies how TLS is to be used in government applications.
Trust Anchor		A public or symmetric key that is trusted because it is directly built into hardware or software, or securely provisioned via out-of-band means, rather than because it is vouched for by another trusted entity (e.g. in a public key certificate). A trust anchor may have name or policy constraints limiting its scope.
Usability		Per ISO/IEC 9241-11: Extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency, and satisfaction in a specified context of use.
Verifier		An entity that verifies the claimant's identity by verifying the claimant's possession and control of one or two authenticators using an authentication protocol. To do this, the verifier may also need to validate credentials that link the authenticator(s) to the subscriber's identifier and check their status.
Verifier Impersonation		A scenario where the attacker impersonates the verifier in an authentication protocol, usually to capture information that can be used to masquerade as a subscriber to the real verifier. In previous editions of SP 800-63, authentication protocols that are resistant to verifier impersonation have been described as "strongly MitM resistant".
Virtual In-Person Proofing		A remote identity proofing process that employs physical, technical and procedural measures that provide sufficient confidence that the remote session can be considered equivalent to a physical, in-person identity proofing process.
Weakly Bound Credentials		Credentials that are bound to a subscriber in a manner than can be modified without invalidating the credential.
Zero-Knowledge Password Protocol		A password-based authentication protocol that allows a claimant to authenticate to a verifier without revealing the password to the verifier. Examples of such protocols are EKE, SPEKE and SRP.
Zeroize		Overwrite a memory location with data consisting entirely of bits with the value zero so that the data is destroyed and not recoverable. This is often contrasted with deletion methods that merely destroy reference to data within a file system rather than the data itself.

Term Name

Abbreviations

Definition

Access

To make contact with one or more discrete functions of an online, digital service.

Active Attack

An attack on the authentication protocol where the attacker transmits data to the claimant, Credential Service Provider (CSP), verifier, or Relying Party (RP). Examples of active attacks include man-in-the-middle (MitM), impersonation, and session hijacking.

Address of Record

The validated and verified location (physical or digital) where an individual can receive communications using approved mechanisms.

Applicant

A subject undergoing the processes of enrollment and identity proofing.

Approved Cryptography

Federal Information Processing Standard (FIPS)-approved or NIST recommended. An algorithm or technique that is either 1) specified in a FIPS or NIST Recommendation, or 2) adopted in a FIPS or NIST Recommendation.

Assertion

A statement from a verifier to an RP that contains information about a subscriber. Assertions may also contain verified attributes.

Assertion Reference

A data object, created in conjunction with an assertion, that identifies the verifier and includes a pointer to the full assertion held by the verifier.

Asymmetric Keys

Two related keys, comprised of a public key and a private key, that are used to perform complementary operations such as encryption and decryption or signature verification and generation.

Attack

An unauthorized entity's attempt to fool a verifier or RP into believing that the unauthorized individual in question is the subscriber.

Attacker

A party, including an insider, who acts with malicious intent to compromise a system.

Attribute

A quality or characteristic ascribed to someone or something.

Attribute Bundle

A packaged set of attributes, usually contained within an assertion. Attribute bundles offer RPs a simple way to retrieve the most relevant attributes they need from IdPs. Attribute bundles are synonymous with OpenID Connect scopes.

Attribute Reference

A statement asserting a property of a subscriber without necessarily containing identity information, independent of format. For example, for the attribute "birthday," a reference could be "older than 18" or "born in December."

Attribute Value

A complete statement asserting a property of a subscriber, independent of format. For example, for the attribute "birthday," a value could be "12/1/1980" or "December 1, 1980."

Authenticate

See authentication.

Authenticated Protected Channel

An encrypted communication channel that uses approved cryptography where the connection initiator (client) has authenticated the recipient (server). Authenticated protected channels provide confidentiality and MitM protection and are frequently used in the user authentication process. Transport Layer Security (TLS) is an example of an authenticated protected channel where the certificate presented by the recipient is verified by the initiator. Unless otherwise specified, authenticated protected channels do not require the server to authenticate the client. Authentication of the server is often accomplished through a certificate chain leading to a trusted root rather than individually with each server.

Authentication

Verifying the identity of a user, process, or device, often as a prerequisite to allowing access to a system's resources.

Authentication Factor

The three types of authentication factors are something you know, something you have, and something you are. Every authenticator has one or more authentication factors.

Authentication Intent

The process of confirming the claimant's intent to authenticate or reauthenticate by including a process requiring user intervention in the authentication flow. Some authenticators (e.g., OTP devices) establish authentication intent as part of their operation, others require a specific step, such as pressing a button, to establish intent. Authentication intent is a countermeasure against use by malware of the endpoint as a proxy for authenticating an attacker without the subscriber's knowledge.

Authentication Protocol

A defined sequence of messages between a claimant and a verifier that demonstrates that the claimant has possession and control of one or more valid authenticators to establish their identity, and, optionally, demonstrates that the claimant is communicating with the intended verifier.

Authentication Protocol Run

An exchange of messages between a claimant and a verifier that results in authentication (or authentication failure) between the two parties.

Authentication Secret

A generic term for any secret value that an attacker could use to impersonate the subscriber in an authentication protocol. These are further divided into short-term authentication secrets, which are only useful to an attacker for a limited period of time, and long-term authentication secrets, which allow an attacker to impersonate the subscriber until they are manually reset. The authenticator secret is the canonical example of a long-term authentication secret, while the authenticator output, if it is different from the authenticator secret, is usually a short-term authentication secret.

Authenticator

Something the claimant possesses and controls (typically a cryptographic module or password) that is used to authenticate the claimant's identity. In previous editions of SP 800-63, this was referred to as a token.

Authenticator Assurance Level

AAL

A category describing the strength of the authentication process.

Authenticator Output

The output value generated by an authenticator. The ability to generate valid authenticator outputs on demand proves that the claimant possesses and controls the authenticator. Protocol messages sent to the verifier are dependent upon the authenticator output, but they may or may not explicitly contain it.

Authenticator Secret

The secret value contained within an authenticator.

Authenticator Type

A category of authenticators with common characteristics. Some authenticator types provide one authentication factor, others provide two.

Authenticity

The property that data originated from its purported source.

Authoritative Source

An entity that has access to, or verified copies of, accurate information from an issuing source such that a CSP can confirm the validity of the identity evidence supplied by an applicant during identity proofing. An issuing source may also be an authoritative source. Often, authoritative sources are determined by a policy decision of the agency or CSP before they can be used in the identity proofing validation phase.

Authorize

A decision to grant access, typically automated by evaluating a subject's attributes.

Back-Channel Communication

Communication between two systems that relies on a direct connection (allowing for standard protocol-level proxies), without using redirects through an intermediary such as a browser. This can be accomplished using HTTP requests and responses.

Bearer Assertion

The assertion a party presents as proof of identity, where possession of the assertion itself is sufficient proof of identity for the assertion bearer.

Binding

An association between a subscriber identity and an authenticator or given subscriber session.

Biometrics

Automated recognition of individuals based on their biological and behavioral characteristics.

Challenge-Response Protocol

An authentication protocol where the verifier sends the claimant a challenge (usually a random value or nonce) that the claimant combines with a secret (such as by hashing the challenge and a shared secret together, or by applying a private key operation to the challenge) to generate a response that is sent to the verifier. The verifier can independently verify the response generated by the claimant (such as by re-computing the hash of the challenge and the shared secret and comparing to the response, or performing a public key operation on the response) and establish that the claimant possesses and controls the secret.

Claimant

A subject whose identity is to be verified using one or more authentication protocols.

Claimed Address

The physical location asserted by a subject where they can be reached. It includes the individual's residential street address and may also include their mailing address. For example, a person with a foreign passport living in the U.S. will need to give an address when going through the identity proofing process. This address would not be an "address of record" but a "claimed address."

Claimed Identity

An applicant's declaration of unvalidated and unverified personal attributes.

Completely Automated Public Turing test to tell Computers and Humans Apart

CAPTCHA

An interactive feature added to web forms to distinguish whether a human or automated agent is using the form. Typically, it requires entering text corresponding to a distorted image or a sound stream.

Credential

An object or data structure that authoritatively binds an identity - via an identifier or identifiers - and (optionally) additional attributes, to at least one authenticator possessed and controlled by a subscriber. While common usage often assumes that the subscriber maintains the credential, these guidelines also use the term to refer to electronic records maintained by the CSP that establish binding between the subscriber's authenticator(s) and identity.

Credential Service Provider

CSP

A trusted entity that issues or registers subscriber authenticators and issues electronic credentials to subscribers. A CSP may be an independent third party or issue credentials for its own use.

Cross-site Request Forgery

CSRF

An attack in which a subscriber currently authenticated to an RP and connected through a secure session browses to an attacker's website, causing the subscriber to unknowingly invoke unwanted actions at the RP. For example, if a bank website is vulnerable to a CSRF attack, it may be possible for a subscriber to unintentionally authorize a large money transfer, merely by viewing a malicious link in a webmail message while a connection to the bank is open in another browser window.

Cross-site Scripting

XSS

A vulnerability that allows attackers to inject malicious code into an otherwise benign website. These scripts acquire the permissions of scripts generated by the target website and can therefore compromise the confidentiality and integrity of data transfers between the website and client. Websites are vulnerable if they display user-supplied data from requests or forms without sanitizing the data so that it is not executable.

Cryptographic Authenticator

An authenticator where the secret is a cryptographic key.

Cryptographic Key

A value used to control cryptographic operations, such as decryption, encryption, signature generation, or signature verification. For the purposes of these guidelines, key requirements shall meet the minimum requirements stated in Table 2 of NIST SP 800-57 Part 1. See also asymmetric keys, symmetric key.

Cryptographic Module

A set of hardware, software, and/or firmware that implements approved security functions (including cryptographic algorithms and key generation).

Data Integrity

The property that data has not been altered by an unauthorized entity.

Derived Credential

A credential issued based on proof of possession and control of an authenticator associated with a previously issued credential, so as not to duplicate the identity proofing process.

Digital Authentication

The process of establishing confidence in user identities presented digitally to a system. In previous editions of SP 800-63, this was referred to as Electronic Authentication.

Digital Signature

An asymmetric key operation where the private key is used to digitally sign data and the public key is used to verify the signature. Digital signatures provide authenticity protection, integrity protection, and non-repudiation, but not confidentiality protection.

Diversionary

In regards to KBV, a multiple-choice question for which all answers provided are incorrect, requiring the applicant to select an option similar to "none of the above."

Eavesdropping Attack

An attack in which an attacker listens passively to the authentication protocol to capture information that can be used in a subsequent active attack to masquerade as the claimant.

Electronic Authentication

E-Authentication

See digital authentication.

Enrollment

The process through which an applicant applies to become a subscriber of a CSP and the CSP validates the applicant's identity.

Entropy

A measure of the amount of uncertainty an attacker faces to determine the value of a secret. Entropy is usually stated in bits. A value having n bits of entropy has the same degree of uncertainty as a uniformly distributed n-bit random value.

Federal Information Processing Standard

FIPS

Under the Information Technology Management Reform Act (Public Law 104-106), the Secretary of Commerce approves the standards and guidelines that the National Institute of Standards and Technology (NIST) develops for federal computer systems. NIST issues these standards and guidelines as Federal Information Processing Standards (FIPS) for government-wide use. NIST develops FIPS when there are compelling federal government requirements, such as for security and interoperability, and there are no acceptable industry standards or solutions.

Federation

A process that allows the conveyance of identity and authentication information across a set of networked systems.

Federation Assurance Level

FAL

A category describing the assertion protocol used by the federation to communicate authentication and attribute information (if applicable) to an RP.

Federation Proxy

A component that acts as a logical RP to a set of IdPs and a logical IdP to a set of RPs, bridging the two systems with a single component. These are sometimes referred to as "brokers".

Front-Channel Communication

Communication between two systems that relies on redirects through an intermediary such as a browser. This is normally accomplished by appending HTTP query parameters to URLs hosted by the receiver of the message.

Hash Function

A function that maps a bit string of arbitrary length to a fixed-length bit string. Approved hash functions satisfy the following properties: (1) One-way - It is computationally infeasible to find any input that maps to any pre-specified output; and (2) Collision resistant - It is computationally infeasible to find any two distinct inputs that map to the same output.

Identity

An attribute or set of attributes that uniquely describe a subject within a given context.

Identity Assurance Level

IAL

A category that conveys the degree of confidence that the applicant's claimed identity is their real identity.

Identity Evidence

Information or documentation provided by the applicant to support the claimed identity. Identity evidence may be physical (e.g. a driver license) or digital (e.g. an assertion generated and issued by a CSP based on the applicant successfully authenticating to the CSP).

Identity Proofing

The process by which a CSP collects, validates, and verifies information about a person.

Identity Provider

IdP

The party that manages the subscriber's primary authentication credentials and issues assertions derived from those credentials. This is commonly the CSP as discussed within this document suite.

Issuing Source

An authority responsible for the generation of data, digital evidence (such as assertions), or physical documents that can be used as identity evidence.

Kerberos

A widely used authentication protocol developed at MIT. In "classic" Kerberos, users share a secret password with a Key Distribution Center (KDC). The user (Alice) who wishes to communicate with another user (Bob) authenticates to the KDC and the KDC furnishes a "ticket" to use to authenticate with Bob.

Knowledge-Based Verification

KBV

Identity verification method based on knowledge of private information associated with the claimed identity. This is often referred to as knowledge-based authentication (KBA) or knowledge-based proofing (KBP).

Man-in-the-Middle Attack

MitM, MitMA

An attack in which an attacker is positioned between two communicating parties in order to intercept and/or alter data traveling between them. In the context of authentication, the attacker would be positioned between claimant and verifier, between registrant and CSP during enrollment, or between subscriber and CSP during authenticator binding.

Memorized Secret

A type of authenticator comprised of a character string intended to be memorized or memorable by the subscriber, permitting the subscriber to demonstrate something they know as part of an authentication process.

Message Authentication Code

MAC

A cryptographic checksum on data that uses a symmetric key to detect both accidental and intentional modifications of the data. MACs provide authenticity and integrity protection, but not non-repudiation protection.

Mobile Code

Executable code that is normally transferred from its source to another computer system for execution. This transfer is often through the network (e.g., JavaScript embedded in a web page) but may transfer through physical media as well.

Multi-Factor

A characteristic of an authentication system or an authenticator that requires more than one distinct authentication factor for successful authentication. MFA can be performed using a single authenticator that provides more than one factor or by a combination of authenticators that provide different factors. The three authentication factors are something you know, something you have, and something you are.

Multi-Factor Authentication

MFA

An authentication system that requires more than one distinct authentication factor for successful authentication. Multi-factor authentication can be performed using a multi-factor authenticator or by a combination of authenticators that provide different factors. The three authentication factors are something you know, something you have, and something you are.

Multi-Factor Authenticator

An authenticator that provides more than one distinct authentication factor, such as a cryptographic authentication device with an integrated biometric sensor that is required to activate the device.

Network

An open communications medium, typically the Internet, used to transport messages between the claimant and other parties. Unless otherwise stated, no assumptions are made about the network's security; it is assumed to be open and subject to active (e.g., impersonation, man-in-the-middle, session hijacking) and passive (e.g., eavesdropping) attack at any point between the parties (e.g., claimant, verifier, CSP, RP).

Nonce

A value used in security protocols that is never repeated with the same key. For example, nonces used as challenges in challenge-response authentication protocols SHALL not be repeated until authentication keys are changed. Otherwise, there is a possibility of a replay attack. Using a nonce as a challenge is a different requirement than a random challenge, because a nonce is not necessarily unpredictable.

Offline Attack

An attack where the attacker obtains some data (typically by eavesdropping on an authentication protocol run or by penetrating a system and stealing security files) that he/she is able to analyze in a system of his/her own choosing.

Online Attack

An attack against an authentication protocol where the attacker either assumes the role of a claimant with a genuine verifier or actively alters the authentication channel.

Online Guessing Attack

An attack in which an attacker performs repeated logon trials by guessing possible values of the authenticator output.

Pairwise Pseudonymous Identifier

An opaque unguessable subscriber identifier generated by a CSP for use at a specific individual RP. This identifier is only known to and only used by one CSP-RP pair.

Passive Attack

An attack against an authentication protocol where the attacker intercepts data traveling along the network between the claimant and verifier, but does not alter the data (i.e., eavesdropping).

Passphrase

A passphrase is a memorized secret consisting of a sequence of words or other text that a claimant uses to authenticate their identity. A passphrase is similar to a password in usage, but is generally longer for added security.

Password

See memorized secret.

Personal Data

See personally identifiable information.

Personal Identification Number

A memorized secret typically consisting of only decimal digits.

Personal Information

See personally identifiable information.

Personally Identifiable Information

PII

As defined by OMB Circular A-130, Personally Identifiable Information is information that can be used to distinguish or trace an individual's identity, either alone or when combined with other information that is linked or linkable to a specific individual.

Pharming

An attack in which an attacker corrupts an infrastructure service such as DNS (Domain Name System) causing the subscriber to be misdirected to a forged verifier/RP, which could cause the subscriber to reveal sensitive information, download harmful software, or contribute to a fraudulent act.

Phishing

An attack in which the subscriber is lured (usually through an email) to interact with a counterfeit verifier/RP and tricked into revealing information that can be used to masquerade as that subscriber to the real verifier/RP.

Possession and Control of an Authenticator

The ability to activate and use the authenticator in an authentication protocol.

Practice Statement

A formal statement of the practices followed by the parties to an authentication process (e.g., CSP or verifier). It usually describes the parties' policies and practices and can become legally binding.

Presentation Attack

Presentation to the biometric data capture subsystem with the goal of interfering with the operation of the biometric system.

Presentation Attack Detection

PAD

Automated determination of a presentation attack. A subset of presentation attack determination methods, referred to as liveness detection, involve measurement and analysis of anatomical characteristics or involuntary or voluntary reactions, in order to determine if a biometric sample is being captured from a living subject present at the point of capture.

Private Credentials

Credentials that cannot be disclosed by the CSP because the contents can be used to compromise the authenticator.

Private Key

The secret part of an asymmetric key pair that is used to digitally sign or decrypt data.

Protected Session

A session wherein messages between two participants are encrypted and integrity is protected using a set of shared secrets called session keys. A participant is said to be authenticated if, during the session, they prove possession of one or more authenticators in addition to the session keys, and if the other party can verify the identity associated with the authenticator(s). If both participants are authenticated, the protected session is said to be mutually authenticated.

Pseudonym

A name other than a legal name.

Pseudonymity

The use of a pseudonym to identify a subject.

Pseudonymous Identifier

A meaningless but unique number that does not allow the RP to infer anything regarding the subscriber but which does permit the RP to associate multiple interactions with the subscriber's claimed identity.

Public Credentials

Credentials that describe the binding in a way that does not compromise the authenticator.

Public Key

The public part of an asymmetric key pair that is used to verify signatures or encrypt data.

Public Key Certificate

A digital document issued and digitally signed by the private key of a certificate authority that binds an identifier to a subscriber to a public key. The certificate indicates that the subscriber identified in the certificate has sole control and access to the private key.

Public Key Infrastructure

PKI

A set of policies, processes, server platforms, software, and workstations used for the purpose of administering certificates and public-private key pairs, including the ability to issue, maintain, and revoke public key certificates.

Reauthentication

The process of confirming the subscriber's continued presence and intent to be authenticated during an extended usage session.

Registration

See enrollment.

Relying Party

An entity that relies upon the subscriber's authenticator(s) and credentials or a verifier's assertion of a claimant's identity, typically to process a transaction or grant access to information or a system.

Remote

(In the context of remote authentication or remote transaction) An information exchange between network-connected devices where the information cannot be reliably protected end-to-end by a single organization's security controls.

Replay Attack

An attack in which the attacker is able to replay previously captured messages (between a legitimate claimant and a verifier) to masquerade as that claimant to the verifier or vice versa.

Replay Resistance

The property of an authentication process to resist replay attacks, typically by use of an authenticator output that is valid only for a specific authentication.

Restricted

An authenticator type, class, or instantiation having additional risk of false acceptance associated with its use that is therefore subject to additional requirements.

Risk Assessment

The process of identifying, estimating, and prioritizing risks to organizational operations (including mission, functions, image, or reputation), organizational assets, individuals, and other organizations, resulting from the operation of a system. It is part of risk management, incorporates threat and vulnerability analyses, and considers mitigations provided by security controls planned or in place. Synonymous with risk analysis.

Risk Management

The program and supporting processes to manage information security risk to organizational operations (including mission, functions, image, reputation), organizational assets, individuals, other organizations, and includes: (i) establishing the context for risk-related activities; (ii) assessing risk; (iii) responding to risk once determined; and (iv) monitoring risk over time.

Salt

A non-secret value used in a cryptographic process, usually to ensure that the results of computations for one instance cannot be reused by an attacker.

Secure Sockets Layer

SSL

See Transport Layer Security (TLS).

Session

A persistent interaction between a subscriber and an endpoint, either an RP or a CSP. A session begins with an authentication event and ends with a session termination event. A session is bound by use of a session secret that the subscriber's software (a browser, application, or OS) can present to the RP or CSP in lieu of the subscriber's authentication credentials.

Session Hijack Attack

An attack in which the attacker is able to insert himself or herself between a claimant and a verifier subsequent to a successful authentication exchange between the latter two parties. The attacker is able to pose as a subscriber to the verifier or vice versa to control session data exchange. Sessions between the claimant and the RP can be similarly compromised.

Shared Secret

A secret used in authentication that is known to the subscriber and the verifier.

Side-Channel Attack

An attack enabled by leakage of information from a physical cryptosystem. Characteristics that could be exploited in a side-channel attack include timing, power consumption, and electromagnetic and acoustic emissions.

Single-Factor

A characteristic of an authentication system or an authenticator that requires only one authentication factor (something you know, something you have, or something you are) for successful authentication.

Social Engineering

The act of deceiving an individual into revealing sensitive information, obtaining unauthorized access, or committing fraud by associating with the individual to gain confidence and trust.

Special Publication

A type of publication issued by NIST. Specifically, the SP 800-series reports on the Information Technology Laboratory's research, guidelines, and outreach efforts in computer security, and its collaborative activities with industry, government, and academic organizations.

Subject

A person, organization, device, hardware, network, software, or service.

Subscriber

A party who has received a credential or authenticator from a CSP.

Symmetric Key

A cryptographic key used to perform both the cryptographic operation and its inverse. For example, to encrypt and decrypt or create a message authentication code and to verify the code.

Token

See authenticator.

Token Authenticator

See authenticator output.

Token Secret

See authenticator secret.

Transaction

A discrete event between a user and a system that supports a business or programmatic purpose. A government digital system may have multiple categories or types of transactions, which may require separate analysis within the overall digital identity risk assessment.

Transport Layer Security

TLS

An authentication and security protocol widely implemented in browsers and web servers. TLS is defined by RFC 5246. TLS is similar to the older SSL protocol, and TLS 1.0 is effectively SSL version 3.1. NIST SP 800-52, Guidelines for the Selection and Use of Transport Layer Security (TLS) Implementations, specifies how TLS is to be used in government applications.

Trust Anchor

A public or symmetric key that is trusted because it is directly built into hardware or software, or securely provisioned via out-of-band means, rather than because it is vouched for by another trusted entity (e.g. in a public key certificate). A trust anchor may have name or policy constraints limiting its scope.

Usability

Per ISO/IEC 9241-11: Extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency, and satisfaction in a specified context of use.

Verifier

An entity that verifies the claimant's identity by verifying the claimant's possession and control of one or two authenticators using an authentication protocol. To do this, the verifier may also need to validate credentials that link the authenticator(s) to the subscriber's identifier and check their status.

Verifier Impersonation

A scenario where the attacker impersonates the verifier in an authentication protocol, usually to capture information that can be used to masquerade as a subscriber to the real verifier. In previous editions of SP 800-63, authentication protocols that are resistant to verifier impersonation have been described as "strongly MitM resistant".

Virtual In-Person Proofing

A remote identity proofing process that employs physical, technical and procedural measures that provide sufficient confidence that the remote session can be considered equivalent to a physical, in-person identity proofing process.

Weakly Bound Credentials

Credentials that are bound to a subscriber in a manner than can be modified without invalidating the credential.

Zero-Knowledge Password Protocol

A password-based authentication protocol that allows a claimant to authenticate to a verifier without revealing the password to the verifier. Examples of such protocols are EKE, SPEKE and SRP.

Zeroize

Overwrite a memory location with data consisting entirely of bits with the value zero so that the data is destroyed and not recoverable. This is often contrasted with deletion methods that merely destroy reference to data within a file system rather than the data itself.

Bona Fide Non-US Federal Government Agency or Organization, v1.0

Assessment Steps (2)

Conformance Criteria (2)

Metadata

Terms (139)